External Biphasic Defibrillator Monitor

Display

• Display Type: High-resolution TFT color display

• Screen Size: 7-inch (17.7 cm) diagonal

• Resolution: 800 × 480 pixels

• Sweep Speed: 12.5, 25, 50 mm/s

• Displayed Parameters: Heart Rate, NIBP, SpO₂, Temperature, Delivered Energy

ECG

• Patient Connection: 3-lead ECG cable, 5-lead ECG cable, or paddles

• Lead Selection: Paddles, I, II, III, aVR, aVL, aVF, V

• ECG Gain: 2.5, 5, 10, 20, 30 mm/mV

• Heart Rate Range: 20–350 bpm

• Protection: 4000 VAC/50 Hz isolation protection, resistant to electrosurgical interference and defibrillation

Non-Invasive Blood Pressure (NIBP)

• Operating Mode: Manual / Automatic

• Measurement Method: Oscillometric

• Cuff Options: Standard adult cuff; optional pediatric and neonatal cuffs

Temperature

• Measurement Range: 0–50°C

• Resolution: 0.1°C

Pulse Oximetry (SpO₂)

• Display: SpO₂ value, pleth waveform, pulse rate

• Measurement Range: 0–99%

• Applicable Patients: Adult, pediatric, and neonatal

• Standard Probe: Adult finger clip

• Optional Probes: Pediatric Y-type clip and neonatal wrap sensor

Defibrillator

• Waveform: Biphasic

• Defibrillation Modes: Manual external synchronous and asynchronous defibrillation

• Charging Time: ＜10 seconds to 360 J

• Energy Display: Displays both selected and delivered energy

• Charging Prompt: Voice and visual prompts

• Energy Levels: 0, 3, 5, 7, 10, 20, 30, 50, 100, 200, 300, 360 J

• Standard Paddles: Reusable adult external paddles with integrated pediatric paddles

• Programmable Energy Protocols

  200 / 300 / 360 J

  150 / 150 / 200 J

  50 / 75 / 100 J

  30 / 30 / 50 J

Battery

• Battery Type: Two Li-ion batteries (Li1104C, 11.1 VDC, 4000 mAh each)

• Operating Capacity: Up to 10 hours of continuous ECG monitoring or 60 full-energy discharges

• Low Battery Indicator: Flashing battery icon on the display and battery status indicator on the front panel

• Recharge Time:

• 80% charge in approximately 3 hours

• Full charge in approximately 5 hours

Built-in Thermal Recorder

• Paper Width: 50 mm thermal paper

• Printing Method: High-resolution thermal printhead

Recorded Information

• Date and time

• Sweep speed

• Waveform gain

• Heart rate

• Delivered energy (J)

• ECG waveform

Recording Modes

• Heart rate alarm recording

• Automatic timed recording

• Real-time recording

• Defibrillation event recording

Power Supply

• AC/DC Operation: AC 100–240 V, 50/60 Hz or rechargeable batteries

• Vehicle Power (Optional): DC 12 V

Main Unit

• Design: Portable

• Dimensions: 320 × 205 × 410 mm

• Weight: 7.5 kg

Optional AED Function

• Voice and on-screen prompts